Thumbnail view is not available in unique tab

The best solution for finding and removing duplicate files.
Post Reply
Callistemon
Posts: 85
Joined: Fri Jun 25, 2021 5:15 am

Thumbnail view is not available in unique tab

Post by Callistemon »

The unique/remaining files tab does not provide the thumbnails viewing mode. Only the duplicate files tab allows this.
Last edited by Callistemon on Tue Jan 25, 2022 10:48 pm, edited 1 time in total.
Callistemon
Posts: 85
Joined: Fri Jun 25, 2021 5:15 am

Re: Thumbnail view is not available in unique tab

Post by Callistemon »

I still have this issue. With another disk that has I/O Device Errors, there are a few thousand unique images on it. I have deleted thousands of unwanted images from the other source, and simply patching the other disk with all these unique images would undo that effort. At the same time, assuming all are unwanted will result in any good images that were not mirrored being lost. Viewing thumbnails of those thousands of unique images will require copying all to a folder, and using Windows Explorer to view thumbnails. That will make copying good images difficult, as the paths of the images will no longer reflect which directories they belong in the other disk. Thumbnails for unique files is far more important than for duplicate files, which is already supported.
User avatar
DigitalVolcano
Site Admin
Posts: 1717
Joined: Thu Jun 09, 2011 10:04 am

Re: Thumbnail view is not available in unique tab

Post by DigitalVolcano »

You can turn on the Preview column in the unique tab - this will allow the viewing of thumbnails.
Callistemon
Posts: 85
Joined: Fri Jun 25, 2021 5:15 am

Re: Thumbnail view is not available in unique tab

Post by Callistemon »

I did end up using the preview column last night. Because there were RAW images, it became slow and stuck while scrolling, and the memory usage reached 99% multiple times. The size of all results combined, in full resolution, could fit in the 16 GB of memory. Because of that, I tried to launch HWiNFO, since that's configured to pause applications with PsSuspend64 when memory reaches 99% to avoid jamming the computer. That's supposed to provide an opportunity to close other programs before resuming, since the computers have jammed so many times without the lock. However, launching HWiNFO caused the Seagate HDD to jam with an I/O Device Error. Duplicate Cleaner 5 disappeared from the taskbar, and the results could not be restored since it wasn't the most recent instance. Duplicate Cleaner 4 did not crash when I/O Device Errors occurred, it only had errors when trying to delete. All instances should be saved, with a box to choose which to restore, and a choice to save or not when closing properly.

Diagnostic Data Viewer shows error reports for Duplicate Cleaner 5, sorted with most recent first. This is on Windows 10 build 19044.1503.

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 3:19:32 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           APPCRASH
Application Name:             Duplicate Cleaner 5.exe
Application Version:          5.0.0.13
Application Timestamp:        613a5450
Fault Module Name:            KERNELBASE.dll
Fault Module Version:         10.0.19041.1503
Fault Module Timestamp:       b2acaea9
Exception Code:               c000041d
Exception Offset:             0000000000034f69

Extra information about the problem
Bucket ID:			 73c81754390737fdebcb69d94845032e (2002810841237619502)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 3:19:28 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           CLR20r3
Problem Signature 01:         Duplicate Cleaner 5.exe
Problem Signature 02:         5.0.0.13
Problem Signature 03:         613a5450
Problem Signature 04:         Xceed.Wpf.DataGrid.v7.0
Problem Signature 05:         7.0.21122.9580
Problem Signature 06:         6033c9aa
Problem Signature 07:         ba5
Problem Signature 08:         f
Problem Signature 09:         System.InvalidOperationException

Extra information about the problem
Bucket ID:			 0269449573efdf9d965320e6d686d8df (1608665667715127519)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 3:35:41 AM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           APPCRASH
Application Name:             Duplicate Cleaner 5.exe
Application Version:          5.0.0.13
Application Timestamp:        613a5450
Fault Module Name:            KERNELBASE.dll
Fault Module Version:         10.0.19041.1503
Fault Module Timestamp:       b2acaea9
Exception Code:               c000041d
Exception Offset:             0000000000034f69

Extra information about the problem
Bucket ID:			 73c81754390737fdebcb69d94845032e (2002810841237619502)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 3:35:31 AM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           CLR20r3
Problem Signature 01:         Duplicate Cleaner 5.exe
Problem Signature 02:         5.0.0.13
Problem Signature 03:         613a5450
Problem Signature 04:         Xceed.Wpf.DataGrid.v7.0
Problem Signature 05:         7.0.21122.9580
Problem Signature 06:         6033c9aa
Problem Signature 07:         ba5
Problem Signature 08:         f
Problem Signature 09:         System.InvalidOperationException

Extra information about the problem
Bucket ID:			 0269449573efdf9d965320e6d686d8df (1608665667715127519)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/24/2022 7:25:29 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           APPCRASH
Application Name:             Duplicate Cleaner 5.exe
Application Version:          5.0.0.13
Application Timestamp:        613a5450
Fault Module Name:            KERNELBASE.dll
Fault Module Version:         10.0.19041.1466
Fault Module Timestamp:       e01c7650
Exception Code:               c000041d
Exception Offset:             0000000000034f69

Extra information about the problem
Bucket ID:			 9f09bd73d7da994d370b6d7a9e4c0b73 (1660541261025381235)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/24/2022 7:25:28 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           APPCRASH
Application Name:             Duplicate Cleaner 5.exe
Application Version:          5.0.0.13
Application Timestamp:        613a5450
Fault Module Name:            KERNELBASE.dll
Fault Module Version:         10.0.19041.1466
Fault Module Timestamp:       e01c7650
Exception Code:               c0020001
Exception Offset:             0000000000034f69

Extra information about the problem
Bucket ID:			 2c6bbae297ee9f5dbb0a1c609245a0d8 (1948400989887635672)
Callistemon
Posts: 85
Joined: Fri Jun 25, 2021 5:15 am

Re: Thumbnail view is not available in unique tab

Post by Callistemon »

So this time HWiNFO was started before inserting the defective disk, so it could run without causing an I/O Device Error during detection. The memory quickly reached 99%, and Duplicate Cleaner processes were paused with PsSuspend64. After it resumed, Duplicate Cleaner showed an error "The exception unknown software exception (0xe0434352) occurred in the application at location 0x00007FFF25C34F69" and disappeared a couple seconds later. The Seagate HDD is not currently jammed with an I/O Device Error, so the I/O Errors may not actually be causing Duplicate Cleaner 5 to crash. It is probably the memory management. Here are the latest two error reports in Diagnostic Data Viewer.

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 6:37:36 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           APPCRASH
Application Name:             Duplicate Cleaner 5.exe
Application Version:          5.0.0.13
Application Timestamp:        613a5450
Fault Module Name:            KERNELBASE.dll
Fault Module Version:         10.0.19041.1503
Fault Module Timestamp:       b2acaea9
Exception Code:               c000041d
Exception Offset:             0000000000034f69

Extra information about the problem
Bucket ID:			 73c81754390737fdebcb69d94845032e (2002810841237619502)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 6:36:31 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           CLR20r3
Problem Signature 01:         Duplicate Cleaner 5.exe
Problem Signature 02:         5.0.0.13
Problem Signature 03:         613a5450
Problem Signature 04:         Xceed.Wpf.DataGrid.v7.0
Problem Signature 05:         7.0.21122.9580
Problem Signature 06:         6033c9aa
Problem Signature 07:         ba5
Problem Signature 08:         f
Problem Signature 09:         System.InvalidOperationException

Extra information about the problem
Bucket ID:			 0269449573efdf9d965320e6d686d8df (1608665667715127519)
Callistemon
Posts: 85
Joined: Fri Jun 25, 2021 5:15 am

Re: Thumbnail view is not available in unique tab

Post by Callistemon »

It was dragging at 100% memory usage, and took several seconds for the screenshot tool to fade in choppy when pressing Windows + Shift + S. This is with an NVMe SSD. After it resumed, the memory usage dropped to 45%, and then Duplicate Cleaner 5 crashed with the following error reports. 37.457 GB of total physical and virtual memory was used, with 0 MB physical memory available. This occurs when scrolling with two fingers, but less with the scrollbar arrows. With the scrollbar arrows, the memory usage forms triangles that are overall even.

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 7:31:20 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           APPCRASH
Application Name:             Duplicate Cleaner 5.exe
Application Version:          5.0.0.13
Application Timestamp:        613a5450
Fault Module Name:            KERNELBASE.dll
Fault Module Version:         10.0.19041.1503
Fault Module Timestamp:       b2acaea9
Exception Code:               c000041d
Exception Offset:             0000000000034f69

Extra information about the problem
Bucket ID:			 73c81754390737fdebcb69d94845032e (2002810841237619502)

Code: Select all

Description
Faulting Application Path:	 C:\Program Files (x86)\Duplicate Cleaner 5\Duplicate Cleaner 5.exe
Creation Time:			 1/26/2022 7:30:13 PM
Problem:			 Stopped working
Status:				 Report sent

Problem signature
Problem Event Name:           CLR20r3
Problem Signature 01:         Duplicate Cleaner 5.exe
Problem Signature 02:         5.0.0.13
Problem Signature 03:         613a5450
Problem Signature 04:         Xceed.Wpf.DataGrid.v7.0
Problem Signature 05:         7.0.21122.9580
Problem Signature 06:         6033c9aa
Problem Signature 07:         ba5
Problem Signature 08:         f
Problem Signature 09:         System.InvalidOperationException

Extra information about the problem
Bucket ID:			 0269449573efdf9d965320e6d686d8df (1608665667715127519)
Post Reply